The HD platform is the latest generation technology in Plug-in Electronics for our growing range of products.
Direct board replacement, means eliminating the requirement for component level repairs. The HD platform is well suited to all operating environments especially offshore and remote locations.
Products on the HD tool bus, they can be run below the telemetry control unit (TCU) mono-conductor telemetry tool, or the high capacity memory logging tool (MLT) and combined with other technology such as our RAS™, scintillation and spectral gamma ray, RADii®, iQ™ & ProMAC™ well integrity products.
The following tools are available in HD:
| Image | Name | SKU | Description |
|---|---|---|---|
 | Array Gas Hold Up Tool - HD - 1 11/16 in. | AGH001 | The Array Gas Hold Up Tool (AGH001) is a 6 sensor Optical Array Gas Hold Up tool. Both gas hold up and bubble count are provided by each sensor. The opening diameter can be restricted to avoid contamination … |
 | Combined Capacitance, Flow Electronics & Temperature Tool - HD - 1 11/16 in. | CFT004 | The Capacitance Flow Electronics & Temperature Tool (CFT004) offers a reduced length multiple sensor solution. All standard Fixed Cage Spinners and our Full Bore Spinner are compatible with the CFT. The capacitance sensor provides an indication of the … |
 | Combined Capacitance, Flow Electronics & Temperature Tool - HD - 1 3/8 in. | CFT104 | The Capacitance Flow Electronics & Temperature Tool (CFT104) offers a reduced length multiple sensor solution. All standard Fixed Cage Spinners and our Full Bore Spinner are compatible with the CFT. The capacitance sensor provides an indication of the … |
| Combined Capacitance, Flow Electronics & Temperature Tool (Slim) - HD - 1 3/8 in. | CFT101 | The Capacitance Flow Electronics & Temperature Tool “Slim” (CFT101) offers a reduced length multiple sensor solution. All standard Fixed Cage Spinners and our Full Bore Spinner are compatible with the CFT. The capacitance sensor provides an indication of … |
 | Dual Axis Inclinometer - HD - 1 11/16 in. | DAI001 | The Dual Axis Inclinometer (DAI001) utilizes a 3 Axis accelerometer to detect linear acceleration in three perpendicular directions. Ratings & Dimensions Max temperature 350°F (177°C) Max pressure 15,000 psi (103.4 mPa) Outer diameter 1.69 in (43.0 mm) Length … |
 | Fast Response Temperature - HD - 1 11/16 in. | FRT001 | The Fast Response Temperature (FRT001) tool measures well bore temperature by means of a platinum resistance thermometer housed in a low mass Inconel tube. This tool provides an accurate, rapid response and high resolution temperature measurement that is … |
 | Fixed Cage Spinner Mechanical - HD - 1 11/16 in. | FCSM01, FCSM02 and FCSM04 | The Fixed Cage Spinner Mechanical (FCSM01,02,04) is run in combination with the 1 11/16 inch FLTE (Flow & Temperature Electronics) which combines the flowmeter sensor electronics with a fast response temperature tool or with our 1 11/16 inch … |
 | Fixed Cage Spinner Mechanical - HD - 1 3/8 in. | FCSM101, FCSM102 and FCSM104 | The Fixed Cage Spinner Mechanical (FCSM101,102,104) is run in combination with the 1 3/8 inch FLTE (Flow & Temperature Electronics) which combines the flowmeter sensor electronics with a fast response temperature tool or with our 1 3/8 inch … |
 | Flowmeter and Temperature Electronics - HD - 1 11/16 in. | FLTE01 | The Flowmeter and Temperature Electronics (FLTE01) is used in with both the Full Bore Spinner (FBSM01) and the Fixed Cage Spinner Mechanical (FCSM01-02) range of products. A dedicated hall effect array provides ten pulses per revolution flowmeter output … |
| Flowmeter and Temperature Electronics - HD - 1 3/8 in. | FLTE101 | The Flowmeter and Temperature Electronics (FLTE101) is used in with both the Full Bore Spinner (FBSM101) and the Fixed Cage Spinner Mechanical (FCSM101-103) range of products. A dedicated hall effect array provides ten pulses per revolution flowmeter output … |
 | Fluid Capacitance Tool - HD - 1 11/16 in. | FCT004 | The Fluid Capacitance Tool (FCT004) provides an indication of the fluid type surrounding the sensor by measuring the dielectric constant of the fluid between the sensor and tool body. Used in combination with other sensors it provides qualitative … |
 | Fluid Density Tool - HD - 1 11/16 in. | FDT001 | The Fluid Density Tool (FDT001) utilizes a double encapsulated low energy AM241 source and scintillation detector assembly to measure fluid density in the measurement window of the tool. This measurement is unaffected by well deviation or fluid velocity … |
| Fluid Density Tool - HD - 1 3/8 in. | FDT101 | The Fluid Density Tool (FDT101) utilizes a double encapsulated low energy AM241 source and scintillation detector assembly to measure fluid density in the measurement window of the tool. This measurement is unaffected by well deviation or fluid velocity … |
| Fluid Density Tool - Third Party - HD - 1 11/16 in. | FDT002 | The Fluid Density Tool (FDT002) utilizes a double encapsulated low energy AM241 source and scintillation detector assembly to measure fluid density in the measurement window of the tool. This tool is configured for 3rd party source. Ratings & … |
 | Full Bore Spinner Mechanical - HD - 1 11/16 in. | FBSM01 | The Full Bore Spinner Mechanical (FBSM01) combines the flowmeter sensor electronics with a fast response temperature tool or with the 111/16” CFT (Combined Capacitance, Flow & Temperature) tool. The flowmeter closes while passing through the completion tubing and … |
 | Full Bore Spinner Mechanical - HD - 1 3/8 in. | FBSM101 | The Full Bore Spinner Mechanical (FBSM101) combines the flowmeter sensor electronics with a fast response temperature tool or with the 13/8” CFT (Combined Capacitance, Flow & Temperature) tool. The flowmeter closes while passing through the completion tubing and … |
 | Full Bore Spinner Mechanical (Titan Compatible) - HD - 1 11/16 in. | FBSM02 | The Full Bore Spinner Mechanical (FBSM02) closes while passing through the completion tubing and other restrictions and opens in the casing or liner allowing the use of optimum diameter impellers that occupy a large cross-sectional area. The FBSM … |
 | Gamma Ray & Casing Collar Locator - HD - 1 11/16 in. | GCL001 | The Gamma Ray & Casing Collar Locator (GCL001) is a combined Gamma Ray & CCL tool which provides a passive measurement of gamma radiation by means of a Sodium Iodine Scintillation Detector and identifies changes of metal thickness … |
| Gamma Ray & Casing Collar Locator - HD - 1 3/8 in. | GCL101 | The Gamma Ray & Casing Collar Locator (GCL001) is a combined Gamma Ray & CCL tool which provides a passive measurement of gamma radiation by means of a Sodium Iodine Scintillation Detector and identifies changes of metal thickness … |
 | Gamma Ray & Casing Collar Locator - HD - 2 3/4 in. | GCL003 | The Gamma Ray & Casing Collar Locator (GCL003) is a combined Gamma Ray & CCL tool which provides a passive measurement of gamma radiation by means of a Sodium Iodine Scintillation Detector and identifies changes of metal thickness … |
 | HD Crossover (GO to GO) for TCU - 1 3/8 in. | HXO014 | The HD Crossover “GO to GO” (HXO014) is intended to be used with the Telemetry Control Unit (TCU) as a expendable piece to prevent galling and/or damage at the upper connection of the TCU pressure housing. Ratings & … |
 | HD Crossover for RAS - 1 11/16 in. | HXO009 and HXO010 | The HD Crossovers (HXO009 and HXO010) are used to allow the RAS002 to run upside down (inverted) as this may be required in some circumstances. They may also be used as a “flip kit” to allow other HD … |
 | HD Dummy Logging Cable / Line Simulator | DLC002 | The Dummy Logging Cable/Line (DLC002) allows logging tools to be tested on 3 different simulated line lengths with 90Ω, 160Ω and 220Ω representing Short, Medium and Long mono conductor cable lengths. Version Control: 2021.12.14 On-line specifications are for … |
 | HD Interface Panel | HIP002 | The HD Interface Panel (HIP002) is a USB device that adds support for HD tools to the Scientific Data Systems STIP. It is a rugged, reliable, self contained unit which provides 300V DC tool power in addition to … |
 | HD Logging Panel | HLP001 | The HD Logging Panel (HLP001) is a complete logging panel providing full support for our standard service telemetry. Depth and Line Tension inputs are provided. In addition to providing tool power to the panel, it also manages communications … |
 | HD Surface Modem – Surface Telemetry Board | HSM002 | The Dummy Logging Cable/Line (DLC002) allows logging tools to be tested on 3 different simulated line lengths with 90Ω, 160Ω and 220Ω representing Short, Medium and Long mono conductor cable lengths. Version Control: 2021.12.14 On-line specifications are for … |
 | HD Tool Interface Box | TIB001 | The Tool Interface Box (TIB001) is a USB device that replaces the Surface Modem and TCU or Memory Tool for tool testing purposes. When used with Warrior Version 8 it allows single Production Logging Tool sensors, or complete … |
 | In-Line Flowmeter - HD - 1 11/16 , 2 1/8 & 3.15 in. | IFM001, IFM002 and IFM004 | The In-Line Flowmeter (IFM001,002,004) is a compact inline tool that provides a continuous flowmeter log while in tubing and can provide a secondary/back up flowmeter to the Full Bore or Fixed Cage Spinners whilst logging in casing or … |
 | In-Line Flowmeter - HD - 1 3/8 x 1 1/2 in. | IFM105 | The In-Line Flowmeter (IFM105) is a compact inline tool that provides a continuous flowmeter log while in tubing and can provide a secondary/back up flowmeter to the Full Bore or Fixed Cage Spinners whilst logging in casing or … |
| In-Line Flowmeter - HD - 1 3/8 x 1 11/16 in. | IFM101 | The In-Line Flowmeter (IFM101) is a compact inline tool that provides a continuous flowmeter log while in tubing and can provide a secondary/back up flowmeter to the Full Bore or Fixed Cage Spinners whilst logging in casing or … |
 | iQ™ Magnetic Properties Tool - HD - 2 3/4 in. | 050-CI275-1100 | The 4-segment receiver of the iQ™ HD Magnetic Properties Tool measures the casing in 90o sections (quadrants). The tool produces a magnetic field that opposes the primary field casing attenuation and phase shift. The magnitude of the measured … |
| iQ™ Magnetic Properties Tool - HD - 3 1/2 in. | 050-CI350-1100 | The 4-segment receiver of the iQ™ HD Magnetic Properties Tool measures the casing in 90o sections (quadrants). The tool produces a magnetic field that opposes the primary field casing attenuation and phase shift. The magnitude of the measured … |
 | Knuckle Joint Tool - HD - 1 11/16 in. | KJT001 | The Knuckle Joint Tool (KJT001) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled tubing or a … |
 | Knuckle Joint Tool - HD - 1 3/8 in. | KJT101 | The Knuckle Joint Tool (KJT101) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled tubing or a … |
| Knuckle Joint Tool - HD - 2 1/8 in. | KJT002 | The Knuckle Joint Tool (KJT002) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled tubing or a … |
 | Knuckle Joint Tool w/ Wear Banding - HD - 1 11/16 in. | KJT003 | The Knuckle Joint Tool with Wear Banding (KJT003) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled … |
 | Memory Battery Sub - HD - 1 11/16 in. | MBS003 or MBS004 | The Memory Battery Sub (MBS003,004) is used in conjunction with the Memory Logging Tool (MLT002). The tool houses the battery pack. Ratings & Dimensions Diameter 1.69 in (43.0 mm) Max temperature* 392°F (200°C) Max pressure 15,000 psi (103.4 … |
 | Memory Battery Sub - HD - 1 11/16 In. | MBS006 | The Memory Battery Sub (MBS006) is used specifically for the memory RAS (RAS002) logging applications. The tool houses the battery pack. Ratings & Dimensions Diameter 1.69 in (43.0 mm) Max temperature 320°F (160°C) Max pressure 15,000 psi (103.4 … |
| Memory Battery Sub - HD - 1 3/8 in. | MBS103 | The Memory Battery Sub (MBS103) is used in conjunction with the Memory Logging Tool (MLT102). The tool houses the battery pack. Ratings & Dimensions Diameter 1.38 in (34.93 mm) Max temperature* 392°F (200°C) Max pressure 10,000 psi (68.95 … |
 | Memory Logging Tool - HD - 1 11/16 in. | MLT002 | The Memory Logging Tool (MLT002) enables use of all HD platform logging tools without the use of an electric line cable. Tool string power is derived from a suitable battery pack housed in a Memory Battery Sub (MBS003,004). … |
| Memory Logging Tool - HD - 1 3/8 in. | MLT102 | The Memory Logging Tool (MLT102) enables use of all HD platform tools without the use of an electric line cable. Tool string power is derived from a suitable battery pack housed in a Memory Battery Sub (MBS103). Ratings … |
 | ProMAC™ 24 | Multi-Arm Caliper Tool - HD - 1 11/16 in. | 050-MAC24-1100 | The latest generation ProMAC™ series 24-arm caliper tool incorporates a series of mechanical, electrical and electronic design features that greatly increase tool accuracy, reliability, maintainability and overall cost efficiency. Ratings & Dimensions Max Temperature 350°F (177°C) Max Pressure … |
 | ProMAC™ 40 | Multi-Arm Caliper Tool - HD - 2 3/4 in. | 050-MAC40-1100 | The latest generation ProMAC™ series 40-arm caliper tool incorporates a series of mechanical, electrical and electronic design features that greatly increase tool accuracy, reliability, maintainability and overall cost efficiency. Ratings & Dimensions Max Temperature 350°F (177°C) Max Pressure … |
 | Quartz Pressure Tool - HD - 1 11/16 in. | QPT001 | The Quartz Pressure Tool (QPT001) utilizes a precision digital quartz pressure transducer to provide wellbore pressure and gauge temperature. This transducer provides a continuous measurement of well pressure during dynamic passes, or dynamic pressure build-ups or draw-downs. Ratings … |
| Quartz Pressure Tool - HD - 1 3/8 in. | QPT101 | The Quartz Pressure Tool (QPT101) utilizes a precision digital quartz pressure transducer to provide wellbore pressure and gauge temperature. This transducer provides a continuous measurement of well pressure during dynamic passes, or dynamic pressure build-ups or draw-downs. Ratings … |
 | RADii® Cement Bond Tool - HD - 1 11/16 in. | 050-RB169-1000 | The small/medium diameter RADii® HD Segmented Cement Bond Tool uses a single ceramic transmitter, an eight segment receiver at 3 ft. and a single receiver at 5 ft. spacing. The segmented receiver generates a cement map which enables … |
| RADii® Cement Bond Tool - HD - 2 3/4 in. | 050-RB275-1000 | The medium diameter RADii® HD Segmented Cement Bond Tool uses a single ceramic transmitter, an eight segment receiver at 3 ft. and a single receiver at 5 ft. spacing. The segmented receiver generates a cement map which enables … |
| RADii® Cement Bond Tool - HD - 3 1/2 in. | 050-RB350-1000 | The large diameter RADii® HD Segmented Cement Bond Tool uses a single ceramic transmitter, a sixteen segment receiver at 3 ft. and a single receiver at 5 ft. spacing. The segmented receiver generates a cement map which enables … |
 | RAS Calibration Tank & Calibration Tank Insert - HD | CTI001 | The RAS Calibration / Verification Tank & Insert (CTI001) allows for periodic verification of correct tool operation and allows the tool to be tested at surface in a safe fashion. The tank is fabricated from steel and filled … |
 | Reservoir Analysis Sonde (RAS) - HD - 1 11/16 In. | RAS002 | The Reservoir Analysis Sonde (RAS002), is a multi-detector pulsed-neutron system for measuring reservoir saturation using Sigma and Carbon-Oxygen techniques. The sonde features three gamma detectors, the near and the far are high resolution Lanthanum Chloride detectors for Sigma … |
| Reservoir Analysis Sonde Safety Sub - HD - 1 11/16 In. | RSS001 | The Reservoir Analysis Sonde Safety Sub (RSS001), is a mandatory component in a Memory-RAS string. Positioned between the battery and MLT, it is equipped with pressure and temperature sensors to monitor borehole conditions against user programmable thresholds. A … |
| Reservoir Analysis Sonde Sigma - HD - 1 11/16 In. | RAS003 | The RAS003 is a multi-detector pulsed neutron tool for measuring reservoir saturation using Sigma techniques. The sonde features an array of three Sodium Iodide (NaI) detectors. The Sigma measurement is based on the near and far spacings, the … |
 | Spectral Gamma Ray & CCL Tool - HD - 2 3/4 in. | SGRCL2 | The Spectral Gamma Ray & Casing Collar Locator Tool (SGRCL2) operates on our common tool bus and can be combined with the Reservoir Analysis Sonde, Production Logging Tools or both. The SGRCL2 consist of a Casing Collar Locator … |
 | Swivel Joint Tool - HD - 1 11/16 in. | SJT001 | The Swivel Joint Tool (SJT001) is a pressure compensated mono-conductor swivel that allows rotation between the upper and lower tool joints while maintaining electrical continuity. The pressure compensation system allows for free rotation under pressure. Ratings & Dimensions … |
 | Telemetry Control Unit - HD - 1 11/16 in. | TCU002 | The Telemetry Control Unit (TCU002) is the communications control center for the logging system. It provides communications on standard service mono-conductor electric wirelines of up to 9,100m (30,000ft). Located between the inter-tool communications bus and the Wireline Uplink, … |
 | Telemetry Control Unit - HD - 1 3/8 in. | TCU101 | The Telemetry Control Unit (TCU101) is the communications control centre for the logging system. It provides communications on standard service mono-conductor electric wirelines of up to 9,100m (30,000ft). Located between the inter-tool communications bus and the Wireline Uplink, … |
 | Telemetry Gamma Ray & CCL - 2 3/4 in. | TGC003 | The Telemetry Gamma Ray & Casing Collar Locator (TGC003) is a combined Gamma Ray & CCL tool with a Telemetry Control Unit which provides a passive measurement of gamma radiation by means of a Sodium Iodine Scintillation Detector … |
 | Tension and Compression Tool - HD - 1 11/16 in. | TCT001 | The Tension Compression Tool (TCT001) provides continuous downhole tension and compression measurement during logging. This measurement is useful in preventing damage to wireline cable or logging tool string. The TCT can be deployed on electric line, slickline and … |
 | Terminated Bullnose - 1 11/16 in. | TBN001 and TBN002 | The Terminated Bullnose (TBN001) is required when the CFT or FLTE tools are not run. Under normal circumstances these tools would provide line termination and a pressure seal. If they are not used the TBN001 is required. Ratings … |
| Terminated Bullnose - 1 3/8 in. | TBN101 and TBN102 | The Terminated Bullnose (TBN101) is required when the CFT or FLTE tools are not run. Under normal circumstances these tools would provide line termination and a pressure seal. If they are not used the TBN101 is required. Ratings … |
 | Tuning Fork Density Tool - HD - 1 11/16 in. | TFD001 | The Tuning Fork Density Tool (TFD001) is an HD Platform non-radioactive fluid identification tool that is not affected by well inclination. It provides an industry-standard Fluid Density measurement based on vibrating fork technology. Optimized for either pure gas … |
 | XY Caliper Tool - HD - 1 11/16 in. | XYC002 | The XY Caliper Tool (XYC002) provides a continual measurement of independent X & Y internal tubular diameters by means of measurement arms set at 90° apart. The tool closes to 1 11/16” and opens to 9” allowing use … |
