Description
The Fixed Cage Spinner Mechanical (FCSM01,02,04) is run in combination with the 1 11/16 inch FLTE (Flow & Temperature Electronics) which combines the flowmeter sensor electronics with a fast response temperature tool or with our 1 11/16 inch CFT (combined Capacitance, Flow & Temperature) tool. The size is selected depending on the minimum restriction in the completion. The impeller assembly is protected minimizing the likelihood of damage in hole.
Ratings & Dimensions
|
FCSM01 |
FCSM02 |
FCSM04 |
|
|
Max temperature |
350°F (177°C) |
||
|
Max pressure |
15,000 psi (103.4 mPa) |
||
|
Cage diameter |
1.69 in (43.0 mm) |
2.13 in (54 mm) |
3.15 in (80 mm) |
|
Length |
6.5 in (165 mm) |
6.9 in (175 mm) |
7.5 in (191 mm) |
|
Weight |
1.4 lb (0.65 kg) |
1.6 lb (0. kg) |
2.2 lb (1 kg) |
|
Materials |
Corrosion resistant materials used throughout |
Measurements
|
Output |
10 pulses per revolution |
|
Threshold |
<5 ft /min (1.5 m /min) |
|
Range |
Better than 1,500 ft/min |
|
Maximum RPS |
200 rps – 4,000 ft/min (measured by FLTE or CFT) |
Hardware Characteristics
|
Combinability |
All HD tools (RADii, iQ, PL, RAS, etc.) when connected to FLTE & CFT |
|
|
Acquisition Mode |
Real-time (with TCU) |
Memory (with MLT) |
Version Control: 2021.11.17
On-line specifications are for REFERENCE ONLY and subject to change without notice. DO NOT USE FOR FIELD OPERATIONS.
